Automatic Double Head Auger Type Dry Syrup Powder Filling Machine SJAF-D-100
This machine is newly added in S J’S wide range of Packing Machineries. It is used to fill the dry syrup powder, Talcum powder & all other kinds of Non Hydroscopic Powders. SJ is offering you Automatic Single Head Augar Type  Powder Filling machine Model SJAF-D-100. A compact unit totally Made of sturdy M.S. angle welded frame structure duly cladded with S.S.304 grade sheet Stainless steel doors are provided to facilitate the servicing of machine . All parts which are in  contact with powder are made of S.S. 316 material. SJAF-D-100 is a totally CGMP model consist of control panel in front and machine speed can be controlled by the provided A.C.  Frequency Drive.
 Applications :
The incoming dry containers are fed either through unscrambler or pre inspection table  and suitably guided on the moving slat conveyor belt at the required speed of the correct placement below the filling head. Sterilized powder is stored in a powder hopper is agitated by a pair of mechanical agitators for maintaining consistency and uniform bulk density. The container is hold by the pneumatic bottle holder below the filling head, then container is sensed by the container sensor and magnetic clutch which is provided in the filling head starts to rotate. It starts the augar to rotate the pre determine time as per the time  stored in the PLC control. During the rotary motion of the augar it fill the desired quantity of powder inside the container. As soon as the augar rotation complete Pneumatic Container holder release the filled container along with another empty container. And to the next filling head duly filled container is hold by the pneumatic container stopper and empty container will be hold by the second pneumatic container holder and same process will be follow here also to fill the container. Finally, both the duly filled container will be release by the pneumatic container stopper it move on the conveyor for next process.
 Salient Features :
  • Complete S.S. construction  GMP model.
  • PLC control reduces the initial setting time for the production.
  • Pneumatic system can be also controlled by the PLC.
  • All the parts which are coming in contact with the powder are made of S.S. 316 material and easily removable for mandatory autoclaving / sterilization.
  • Change over from one fill size to another fill size and one container size to another container size is easy and with no wastage of time.
  • No Container No Filling system eliminates wastage of costly powders.
  • Inbuilt A.C. Frequency drive is provided to control the speed of the conveyor.
  • Slat conveyor belt to prevent jamming of assembly due to spillage of powder.  
  • Provided FRL unit will eliminate the jamming of pneumatic accessories due to the powder.
 Technical Specification

Output

:

Upto 80 Fills / Min. (Depending Upon the Fill Size, Bottle Neck Dia. And Powder Bulk Density Under the Control Level Of Humidity i.e.35%.)

Fill capacity

:

5 GMS. To 100 GMS. With Different Set Of Augar And Funnel.

Accuracy

:

- 2% Depending Upon the Consistency,
Uniformity And Bulk Density Of Powder Under The Controlled Level Of Humidity Below 35%.

Power characteristics

:

440 Volts, 3 Phase ( 4 Wire System )

Machine dimension
Case dimension

:

2400 MM (L) X 1102 MM (W) X 1675 MM (H)
2845 MM (L) X 1930 MM (W) X 1220 MM (H)

Input Specification

:

Container Dia. : 25 MM To 70 MM.
Container Height : 55 MM To 110 MM.