 |
|
| |
|
|
|
De-Dusting
& De-Burring Machine |
|
SJPDB-80
is designed to dislodge deposited dust particles and extract
all loose dust from the surface of compressed tablets. Surface
dust is a persistent problem with compressed tablets and
create problems at sealing either at Blister or Strip packing
machine.
Deduster is a
simple,handy table top unit to attach to any tabletting
machine's discharge.
|
| The
unit consists of inlet,outlet stainless steel vibratory
perforated disc, acrylic outer covers,vacuum connection
nozzles,compressed air connection and magnetic coil housed
in stainless steel body. All contact parts are made of S.S
304 and components can be easily cleaned/washed or sterilised.
The height of the deduster unit can be easily adjusted by
hydraulically operated stand to suit to the outlet discharge
of different Tabletting machine.
|
| Tablets
fall directly from the tabletting machine onto top charging
plate and travel around the perforated discs, jumps continuously,
due to vibration until they fall through aperture onto the
next disc where they drop up side down and travel to the
path of 2.8 meters (approximately). Tablet dedusting and
deburring is performed as the tablet pass over the vibrating
multilevel perforated discs. Vibration intensity can be
steplessly adjusted by means of Rheostat. Dust is extracted
by Vacuum, connected to Dust extracting arrangement or centralised
vacuum system. On short fall of vacuum, extra filtered compressed
air can be blasted on tablets to accelerate dedusting. (Provision
given with the machine). |
-
GMP
Model.
-
Maintenance
free unit.
-
For
Cleaning or Sterilisation or for change over, all parts
can be easily dismantled without any tools with no time.
-
Vibration
can be controlled by a simple knob.
Tablet conveying route is so geometrically designed
for impingement of tablets on their burrs which can
break easily.
-
Efficient
de-burring and de-dusting and full suction output is
concentrated on de-dusting zone for flushing out powder.
-
Most
of the parts are made of SS 304 Material,SS 316 material
can be supplied on demand with extra cost.
-
Looking
to the discharge height, we can provide you the machine
with small stand & big stand.
|
| Models |
SJPDB-80 |
| Max.
Diameter |
up
to 40 mm |
| Max.
Output |
200,000
tab/hr for 8 mm tab. dia |
| Electricals |
0.5
HP, Single Ø, A.C. |
|
|
|
|
