 |
|
| |
|
|
|
Single
Rotary Tableting Machine - GMP Model |
|
|
-
Machine
is totally enclosed, i.e. top half of the machine (compression
zone) with S.S.hood and acrylic covers and lower half
of the machine complete with mat finished S.S.Covers.
-
This
reduces the noise level and to & fro flow of dust
between compression zone and M/c room.
-
Antivibration
mounting provided. Hence no foundation required.
-
Turret
is made of highly ductile SG Iron casting.
-
Lower
Punch seals (Optional)
-
Large
paint free compression zone with plenty of space for ease
of cleaning & accessibility of components.
-
Electronic
total output counter is provided on the control panel.
-
Operating
system same as our standard model and it is easy to operate
and maintain the machine.
-
Most
of the components are common with our standard model which
reduces inventory of spares.
-
Higher
Turret speed upto 42 RPM gives higher output than standard
machine. (30 RPM for 570 machine)
-
Friction
plate is provided on cam plate to minimise wear &
tear of cam track which also facilitates its easy replacement.
Upper punch dust covers are provided to avoid collection
of dust on punch head.
|
|
|
Extra
Features On Demand For GMP Machine: |
- SS
316 Contact parts inclusive of SS 316 turret die plate.
- Depth
of fill 30mm
- Pre
compression
- Clutch
- PLC
Control
- Upper
Punch Penetration
- Outside
control for pressure and weight
- Auto
lubrication
- Force
feeder
- Two
sided lifting upper track (Tunnel type)
|
|
|
Technical
Specification : |
| Models |
SJP3SH-12 |
SJPD3-16 |
SJPD3-20 |
SJPD3-23 |
| Tooling |
Special
|
"D" |
"D" |
"D/B"
Combined |
| No.
of Stations |
12 |
16 |
20 |
23 |
| Max.
Output (Tab/hr)* |
15,840
|
40,320 |
50,400
|
57,960 |
| Max.
Pressure |
12
Tons |
10
Tons |
10
Tons |
10
Tons |
| Max.
Tablet Dia |
40
mm |
25.4
mm |
25.4
mm |
16
mm |
| Max.
Depth of Fill |
30
mm |
20
mm |
20
mm |
17.4
mm |
| Electricals |
3
HP, 3 Ø, A.C |
2
HP, 3 Ø, A.C |
2
HP, 3 Ø, A.C |
2
HP, 3 Ø, A.C. |
* Practically, the max
attainable output is approx 80 % of the designed one.
* The tablet output
depends upon the following factors.
1. The physical and chemical properties of material to be
compressed.
2. The tablet shape, weight and its thickness.
3. Ambient Conditions.
Note : Electric voltage & frequency can be provided
as per customer's requirement.
The rights for the modifications in design & specs are
reserved without prior notice.
|
|
|
