Outstanding Features :

29 & 35 Stations Press are specially designed to compress DS, Capsules & Oval shaped tablets of length 23 & 19 mm respectively. Force Feeder are provided to regulate uniform flow of large volume of granules at high speed. Force Feeder are with variable speed to feed granules at desired rate. Standard feed frames are also supplied along with the machine. This facilities in compressing certain products where force flow feeders are not suitable. It can also be used as an alternative arrangement in case of breakdown of force Flow Feeders. Unique clutch system to start & stop the machine to avoid abnormal load on the machine. Upper punch penetration system. This facilitates in setting of compression position in the Die. Upper punches are covered with acrylic dust guards. Turret with key slots essential for shaped tooling. Machine is totally enclosed. This reduces the noise level and prevent to & fro flow of dust between compression zone and compression room. Large paint free compression zone to meet cGMP norms. Motor and gear box of feeders are fitted outside the compression zone on top of the machine, which also facilitates ease in maintenance. Anti Vibration mountings provided, hence no foundation is required. Top acrylic guards are interlocked to prevent the machine being operated when the guards are open for safety purpose. Inbuilt control panel / Separate control panel. Lower Punch seal

Extra Features :

3 PC-turret with SS 316 Die pot Two layer attachment with gravity feeder. Outside controls for pressure and weight Auto lubrication

Dust Extractor :

It is essential to use Dust Extraction unit along with CM Press to control the flying dust generated during high speed compression of tablets. With the use of this, flying dust is kept to minimum but it is difficult to eliminate entirely

Technical Specification Models SJPD4-29 SJPDB-35 SJPB-37 SJPBB-45 Tooling "D" "D/B" "B" "BB" No. of Stations 29 35 37 45 Max. Output (Tab/hr) 174,000 210,000 222,000 270,000 Max. Pressure 10 Tons 10 Tons 6.5 Tons 6.5 Tons Max. Tablet Dia 25.4 mm 16(19mm for DS) 16 mm 13 mm Max. Depth of Fill 20 mm 17.4 mm 17.4 mm 17.4 mm Main Motor 5 HP, 3 Ø, A.C 5 HP, 3 Ø, A.C 5 HP, 3 Ø, A.C 5 HP , 3 Ø, A.C Total Power 5.5 HP, 3 Ø, A.C 5.5 HP, 3 Ø, A.C 5.5 HP, 3 Ø, A.C 5.5 HP, 3 Ø, A.C. * Practically, the max attainable output is approx 80 % of the designed one. * The tablet output depends upon the following factors. 1. The physical and chemical properties of material to be compressed. 2. The tablet shape, weight and its thickness. 3. Ambient Conditions. Note : Electric voltage & frequency can be provided as per customer's requirement. The rights for the modifications in design & specs are reserved without prior notice.