 |
|
| |
|
|
Separation
of solids from solids. Liquids from solids and gradation
of materials in accordance with their sizes have always
presented problems. Especially when large quantity of material
is to be processed through finer screens. In recent times
the most important development that took place is the replacement
mechanical sifter & vibro sifter in sleving and straining
operation. Even if a particle is small it would pass through
a screen only if its configuration relating to the opening
is favorable.
For a non-isometric particle, the axis must be correctly
aligned with respect to the place of the screen and the
center of gravity of the particle must be above the aperture
at any instant. Further, the amount of material on the screen
should be such that passage of small particles is not obstructed
by larger particles.
|
| It
is therefore necessary to impart horizontal rotary motion
to the particle by suitable means. Care also has to be taken
to ensure that such motions, particularly during dry sleving
or grading operation. should not be vigorous so as to cause
size reduction of particles themselves or damage to the screen.
Sieving,
Grading and Straining Machine was specially developed with
above design features to provide vibration. The amplitude
of vibration is adjustable to processing needs.
|
-
Chemicals,
Pharmaceuticals, Dyestuff and Pigments, Ceramics, Food
Products, Detergents, Cosmetics, Pesticides and Fertilizers,
Paper Pulp, Resins, Paints, Polyester Chips, Minerals,
Rubber Compounds, Slurries, Metal Powders.
|
-
SS 316 contact parts
-
Portable and compact.
-
Lower energy consumption compared
to reciprocating vibratory system.
-
Standard machines are with
TEFC motor.
-
All contact parts and screen
of 304 AISI Stainless Steel material.
-
Easy dismantling and cleaning
facility for contact parts.
-
Wide range of screen sizes
4-300 mesh.
|
- Explosion
proof / flame proof motor
- Brushing
arrangements, S.S. Lid with charging port, Aluminium
ring & S.S. tie rod for fixing screen finer
than 100 mesh.
|
| Sr No. |
MACHINE |
Vibro
SifterR & D Model |
| |
MODEL |
SJVS-10 |
| 1. |
*Capacity (Kg/hr) |
10 To 20 |
| 2. |
Screen Diameter(mm) |
250 |
| 3. |
Charging Height(mm) |
730 |
| 4. |
Electric Motor |
0.25 HP/3 Phase
/ AC |
| 5. |
Electric Supply |
3 Phase/AC |
| 6. |
Approximate Machine
dimensions ( mm ) |
430 x 410 x 750 |
| 7. |
Approximate Case
Dimensions ( mm ) |
560 X 686 X 890 |
| 8. |
Approximate Net
Machine weight ( kg ) |
46 |
| 9. |
Approximate Gross
Machine weight ( kg ) |
106 |
| 10. |
Features |
Machine
on Rubber feet |
| |
|
Low charging Height |
| |
|
SS316 contact
parts |
| 11 |
Options |
Double Deck |
| |
|
Triple Deck |
| |
|
Four
Deck |
| |
|
SS 316 Contact
Parts |
| |
|
Silicon coated
Sieve. |
| |
|
Lead Free Sieve |
| * |
Higher Capacity
Model also available. |
|
|
|
|
|
